TUTORIALS
We have developed a variety of short video tutorials to help you get the most from your CoreChair!
How-To Tutorials

We have developed a variety of short video tutorials to help you get the most from your CoreChair!

CORECHAIR ASSEMBLY INSTRUCTIONS
Written Instructions:
1. Retrieve base and place it upside down

2. Install casters and gas cylinder

3. Install seat and remove cushion from seat (use force)

4. Lift rear lever

5. Push backrest all the way back and release rear lever

6. Slide backrest rearwards until holes line up

7. Use hex key stored in seat to install screws

8. Place hex key back in the seat, and lift rear lever

9. Slide backrest lever back, release rear level

10. Install cushion

ADJUST FOR FIT AND COMFORT
ADJUST YOUR BALANCE
DISMANTLE THE CORECHAIR
Written Instructions:
1. Turn the CoreChair upside down and place it on a flat surface

2. Put a socket over top of the gas cylinder

3. Hold the base of the chair and use a hammer to hit the socket

4. Take the tool we sent you, place it on the gas cylinder with the tapered end at the bottom

5. Hold gas cylinder and hit the tool until the gas cylinder is removed

Need more help? Please call us at 1-877-300-3797 or by email at info@corechair.com.

CONTACT

905-503-7277

TOLL FREE: 1-877-300-3797

info@corechair.com

Our North American Address:

14845-6 Yonge St, Suite 248

Aurora, Ontario, L4G 6H8, Canada